Wohler iVAM1-12G, User Manual, Page: 13 / 125

iVAM1-12G
Page 13
10.
Status
: This indicator lights green when the system is powered and ready for use.
A solid or blinking yellow color indicates that the product is starting up. A red color
indicates that a system update is taking place. Refer to Appendix A for procedures
to update software.
Rear Panel
The rear panel is shown in Figure 2-2.
Figure 2-2: iVAM1-12G Rear Panel Layout
MADI
Fiber SFP
MADI
BNC
SFP Module
Cage
Network
Port
Balanced XLR
Analog Inputs
Balanced XLR
Analog Outputs
SDI
Inputs
SDI
Output
HDMI Output
AES Inputs
Power
Connection
AES Outputs
Balanced DB-25
Analog Inputs
Balanced DB-
25 Analog
Outputs
TOSLINK
Optical
Input
TOSLINK
Optical
Input
AoIP SFP
Module Cage
Primary /
Secondary
1GB ENET
Option Card
Slot
SFP Module
Cage
SFP Module
Cage
Power Connection
: The iVAM1-12G receives power from an AC inlet, which is a
standard IEC receptacle for 100 to 240 VAC ±10%, 50/60 Hz power connection. Four
regional AC power cords, supplied according to shipping region, are available.
1. SDI Inputs : These two BNC connectors accept the two 12G/3G/HD/SD-
SDI input signals containing audio and video to be monitored. This is a
standard feature.
2.
SDI Output
: This BNC connector outputs the selected 12G/3G/HD/SD-
SDI or SFP module input signal.
3.
HDMI Output
: An HDMI output of the monitored 12G/3G/HD/SD-SDI or
SFP module video source is available from this connection.
4.
Network Port
: This Ethernet port can connect to either a LAN or to a PC
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.