Wohler iVAM1-12G, User Manual, Page: 71 / 125

iVAM1-12G
Page 71
How do the outputs behave if I do not purchase OPT-OUTPUT-
ROUTING license?
If Output routing license is not purchased, the outputs are configured as follows:
1.
Speakers
: All monitored channels are always available on the internal
speakers. The left and right speaker assignment is determined by the
Speaker Assignment
. Audio on the speakers is controlled by the
Volume
and
Balance
knobs and is muted whenever a headphone is inserted into the
Headphone
jack.
2.
Analog XLRs
: These outputs follow the same configuration as the internal
speakers. They are controlled by the
Volume
and
Balance
knobs and are
muted whenever a headphone is inserted into the
Headphone
jack. These
outputs also follow the solo/mute selections on the Audio Meter screen.
3.
AES Pairs 1 through 4
: The first 8 channels appear on these outputs in
numeric order. They are pre-fade, so they are unaffected by the
Volume
and
Balance
knobs or headphone insertion. They are also unaffected by the
solo/mute selections on the Audio Meter screen.
4.
AoIP Pairs 9 and 10
: These outputs follow the same configuration as the
internal speakers. They are controlled by the
Volume
and
Balance
knobs
and are muted whenever a headphone is inserted into the
Headphone
jack.
These outputs also follow the solo/mute selections on the Audio Meter
screen.
5.
HDMI Pair 1
: These outputs follow the same configuration as the internal
speakers. They are controlled by the
Volume
and
Balance
knobs and are
muted whenever a headphone is inserted into the
Headphone
jack. These
outputs also follow the solo/mute selections on the Audio Meter screen.
6.
HDMI Pairs 2, 3 and 4
: These are not enabled in this case.
What is the difference between Global Output Routing and Output
Routing in Presets?
Both are used to configure the unit outputs. Global Output Routing is applied by
default when you select a source or when creating presets and when you don’t
change the Output Routing unique to any Preset. Changes to either of these are
disabled if the OPT-OUTPUT-ROUTING license is not purchased.
How do I route whatever is being monitored to the XLR and AES
outputs?
Using
Global Output Routing
(optional licensing upgrade), you may route any
signals to the XLR & AES outputs. You may route signals to the XLR outputs using
the
Analog/XLR
checkboxes and route signals to the AES outputs by using the
AES/Pair 1
to
Pair 4
checkboxes.