Wohler iVAM1-12G, User Manual, Page: 16 / 125

iVAM1-12G
Page 16
Volume
and
Balance
controls. The
Analog Outputs
are standard on the
iVAM1-12G. Refer to Figure 2-5 for the pinout of this connector.
Figure 2-5: Analog XLR-M Output Connections
12.
Option Card Slot
: This metal plate can be removed to reveal a location
in which future optional modules can be installed.
13.
TOSLINK Optical Input
(optional): This connector is located on the
panel of the optional OPT-iVAM ANALOG Option card, as well as on the
panel of the AoIP Option card. It provides an optical stereo pair input.
14.
Balanced Analog DB-25 Outputs
(optional): This DB-25 female
connector outputs 8 channels of +10dBu broadcast level balanced audio.
This connector is located on the panel of the optional OPT-iVAM ANALOG
Option card. The source of these signals is the monitored audio channels
as shown on meters 1 - 8. Tascam cables may be used, and can be
purchased by contacting Wohler Sales. Refer to Figure 2-6 for the pinout
of this connector.
Note:
PCM channels marked as data channels (such as those containing
encoded Dolby streams) are automatically muted from being sent out to the
external amplifier and speakers.
Note:
When these outputs are used to connect to an external amplifier and
speakers, the external amplifier should be muted whenever the iVAM1-12G is
being powered up or powered down.
15.
Balanced Analog DB-25 Inputs
(optional): This DB-25 female
connector inputs 8 channels of up to +10dBu broadcast level balanced
audio. This connector is located on the panel of the optional OPT-iVAM
ANALOG Option card. These signals are monitored on meters 1 - 8 by
default. Tascam cables may be used, and can be purchased by contacting
Wohler Sales. Refer to Figure 2-6 for the pinout of this connector.