Wohler iVAM1-12G, User Manual, Page: 69 / 125

iVAM1-12G
Page 69
Destination Outputs
On the left of the
Global Output Routing
screen are listed the Destination
Outputs. These are the outputs to which any input can be routed. They are as
follows:
1.
Speaker/Headphone
: Selected inputs will be sent to the left and right
speakers. The default routing is set as per the Speaker Assignment, left
channels are sent to the left speaker and right channels are sent to Right
speaker.
2.
Analog XLR
: Selected inputs will be mixed to the left and right channels and
played through the two Analog XLR Outputs.
3. AES/Pair-1 : Selected inputs will be mixed to the left and right channels and
played through the AES Pair 1 Output.
4.
AES/Pair-2
: Selected inputs will be mixed to the left and right channels and
played through the AES Pair 2 Output.
5.
AES/Pair-3
: Selected inputs will be mixed to the left and right channels and
played through the AES Pair 3 Output.
6.
AES/Pair-4
: Selected inputs will be mixed to the left and right channels and
played through the AES Pair 4 Output. The four AES outputs can be used
together to output, for example, 5.1 or 7.1 surround channels to an external
surround sound monitor system.
7.
AoIP/Pair-9 (DANTE / RAVENNA)
: Selected inputs will be mixed to AoIP
transmit channels 59 and 60. Note that configuration for channels 1 - 58 is
not supported. Use a Dante Controller or Coveloz web interface to route
these channels appropriately.
8.
AoIP/Pair-10 (DANTE / RAVENNA)
: Selected inputs will be mixed to
Channel 61 and Channel 62. Again, use a Dante Controller or Coveloz web
interface to route the remaining pairs appropriately.
9. HDMI/Pair-1 : Selected inputs will be mixed to the left and right channels
and played through first pair of the HDMI Output.
10. HDMI/Pair-2 : Selected inputs will be mixed to the left and right channels
and played through second pair of the HDMI Output.
11.
HDMI/Pair-3
: Selected inputs will be mixed to the left and right channels
and played through third pair of the HDMI Output.
12.
HDMI/Pair-4
: Selected inputs will be mixed to the left and right channels
and played through fourth pair of the HDMI Output.
Source Inputs
The source inputs which may be routed are described in this section.
1.
Cluster Information
: Cluster information show type of cluster and cluster
name.
2.
Speaker Assignment
: Speaker assignment can be used to configure to
which speakers the audio is routed to. The possible options are:
L
Left
R
Right