Wohler iVAM1-12G, User Manual, Page: 33 / 125

iVAM1-12G
Page 33
Speaker Options
Touching the
Speaker Options
selection on the
Unit Settings
Menu screen
proceeds to the
Speaker Options
screen. The controls on this screen affect
various characteristics of the monitored audio as heard on the iVAM1-12G. This
screen is shown in Figure 2-24.
Figure 2-24: Speaker Options Screen
The controls function as follows:
1.
Volume Reference:
The
Volume Reference
setting controls the
attenuation level of the internal speakers. The value ranges from 0 to -255
dB. 0 results in full volume and -255 causes the speakers to be muted.
2.
Treble
: This tone control adjusts the high frequency speaker audio response
from -12 dB to +12 dB. Lowering
Treble
compensates for high frequency
pre-emphasis or removes sibilance effects. Increasing
Treble
will add
“sizzle” to the sound and bring high-pitched sounds out of the mix. The
control can be touched and moved left or right to adjust in 2 dB increments.
After touching the
Treble
control, the
Channel
knob can also be turned to
make the adjustment.
3.
Bass
: This tone control adjusts the low frequency speaker audio response
from -12 dB to +12 dB. Lowering
Bass
will unmask midrange band sounds,
while increasing
Bass
will make the sound “fatter”. The control can be
touched and moved left or right to adjust in 2 dB increments. After touching
the
Bass
control, the
Channel
knob can also be turned to make the
adjustment.
4.
Set to Flat
: Touching this button will set the
Treble
and
Bass
controls to
their midpoint, resulting in a flat response with 0 dB increase or decrease in
treble and bass response.
Touch
Back
to exit this screen.