Wohler iVAM1-12G, User Manual, Page: 14 / 125

iVAM1-12G
Page 14
to let you perform administrative tasks remotely. The Wohler Web GUI is
described in Chapter 4 of this manual. Third party equipment, connecting to
the iVAM1-12G via a LAN plugged into this port and using an API commands,
can view and change product options, as well. This API is described in
Appendix E of this manual.
5.
MADI BNC
: (optional) The COAX input accepts an AES10 64-channel
signal at 48 kHz sample rate. An optional license key must be purchased to
enable this function. The COAX output is reclocked from the MADI source.
When power to the iVAM1-12G is not present, the COAX input and output
are automatically connected together to allow the MADI signal to pass
through. A software license must be installed for this input to function.
Refer to the
System Setup
section in Chapter 4 to install software
licenses.
6.
MADI Fiber SFP
: (optional) This input module accepts an optical AES10
64-channel MADI input signal at 48 kHz sample rate. An optional license
key must be purchased to enable this function. A software license must be
installed for SFP ports to function. Refer to the
System Setup
section in
Chapter 4 to install software licenses.
7.
AES Inputs
: (optional) This HD-15F connector accepts 4 AES3id digital
audio pairs (8 channels) at a 48 kHz sample rate. Refer to Figure 2-3 for
the pinout of this connector. The easiest way to interface with this
connector is to use an HD-15 to VGA adaptor cable. Channels are selected
as AES 1-8. A software license must be installed for these inputs to
function. Refer to the
System Setup
section in Chapter 4 to install
software licenses.
Figure 2-3: AES HD-15F Connector Pinout
8.
AES Outputs
: This HD-15F connector provides 4 AES3id digital audio
pairs (8 channels) at a 48 kHz sample rate from selected monitored
sources. Refer to Figure 2-3 for the pinout of this connector. The easiest
way to interface with this connector is to use an HD-15 to VGA adaptor
cable. These outputs are not controlled by the
Volume
and
Balance
controls. Monitored channels 1 and 2 are sent from AES-1, channels 3 and
4 are sent from AES-2, channels 5 and 6 are sent from AES-3, and
channels 7 and 8 are sent from AES-4.