Wohler iAM-VIDEO-2 User Manual Download Page 69 | Manualshive

Page: 69 / 88

Wohler iAM-VIDEO-2 User Manual Download Page 69

Page 69

Dante Firmware Upgrades

Wohler iAM-VIDEO monitors ship with current Brooklyn II firmware as of the option
installation date. The version information is found in the

Dante Controller Device

View-Status

page. iAM software/firmware is tested with the latest Dante code

release. Therefore it is strongly recommended that iAM-VIDEO and Dante software/
firmware be updated at the same time to ensure compatibility and support of the
latest features.

Use the Audinate

Dante Firmware Update Manager

Windows or OS X application

to update the Dante firmware over the Dante network. Follow the application’s
installation and usage guide plus any applicable technical notes available.

Follow the instructions in

Software Upgrades

for iAM-VIDEO updates.

Dante

TM

Legal Disclosures

TRADEMARK ATTRIBUTION: Products covered in the manual include licence
from Audinate Pty Ltd under US Patents 7747725, 8005939, 7978696,
8171152, European Patent 2255541, Chinese Patent ZL200780026677.0 and
other patents pending or issued, see

www.audinate.com/patents

”, or such other

legend as Audinate may stipulate from time to time to the Manufactured
Product and any packaging and marketing materials therefor.

«
...
67
68
69
70
71
...
»

Summary of Contents for iAM-VIDEO-2

























































































Reviews:

No comments