Page 47
Configuration - Set Mgmt IP Address
The page for configuring the IP address of the
Management (MGMT) Port
for the
local iAM-VIDEO is shown in Figure 4-5.
Figure 4–5: Set Mgmt IP Address
The procedure for changing the IP Address is as follows:
1.
Use DHCP?
Check this box if your network has a DHCP server and you want
to use dynamic addressing. Otherwise, you must enter static IP address
entries in the four fields which follow.
2.
IP Address
:
Enter the network address. Leading zeroes are not required.
3.
IP Mask
: This should usually be 255.255.255.0 unless your network can
work across multiple subnets.
4.
Gateway Address
: This should usually be the same domain and subnet
address numbers as the IP Address, but with the last octet being 1.
5.
DNS-nameserver
: A default value is shown for reference only. DNS is not
normally required for basic static IP network configurations to work. Your IT
administrator will specify a value to work with mixed static/dynamic network
setups.
6.
Network Time Protocol (NTP) Server Information
: If you wish to use
this function, check the box and enter the name or IP address.
7.
Apply
: When you have made all of the necessary entries, press
Apply
to put
the changes into effect.