Page 48
Configuration - Set VoIP Address
The page for configuring the IP address of the
VoIP Port
for the local iAM-VIDEO is
shown in Figure 4-6.
Figure 4–6: Set VOIP Address
The procedure for changing the VoIP Address is as follows:
1.
Use DHCP?
Check this box if your network has a DHCP server and you want
to use dynamic addressing. Otherwise, you must enter static IP address
entries in the four fields which follow.
2.
IP Address
:
Enter the network address. Leading zeroes are not required.
3.
IP Mask
: This should usually be 255.255.255.0 unless your network can
work across multiple subnets.
4.
Gateway Address
: This should usually be the same domain and subnet
address numbers as the IP Address, but with the last octet being 1.
5.
Apply
: When you have made all of the necessary entries, press
Apply
to put
the changes into effect.