Page 29
All Presets
Presets are complete monitoring setups, including video source and audio metering.
Touch the
All Presets
button in the
Main Menu
to display the
All Presets Menu
as shown in Figure 2-22.
Figure 2-22: All Presets Menu
Menu
Recall
G1 sg1 preset1
Group Select
Subgroup Select
Preset Select
preset1
<-
<<-
Preset Page 1 of 1
->>
->
You can set up the content of each Preset using the Web-based GUI software, but
you can select a preset in this menu.
The currently selected Preset is shown in the light blue box at the top center of the
screen. The many possible Presets are sorted as follows:
1.
Groups
: Up to 20 Groups may be defined.
2.
Subgroups
: Each Group may contain up to 100 Subgroups.
3.
Presets
: Each Subgroup may contain up to 20 Presets.
Use the
Group
and then the
Subgroup
buttons to select. Controls at the bottom of
the screen allow you to scroll through the presets. Then, after locating the preset
you want, touch it and then touch
Recall
.
If the selected
Preset
includes both audio and video signals, the both will be
played. However, if the selected
Preset
includes only audio signals, such as AES,
analog, or MADI, then the video screen will be blank, of course.
To exit this menu and return to the
Main Menu
, touch the
Menu
button.
System Options
Touch the
System Options
button in the Main Menu to display the four choices for
setting some system options locally. The options are:
1.
Network Settings
2.
Speaker Options
3.
Factory Reset