Page 13
options may be set in the Web GUI.
AES Out 1
is a standard feature on
the iAM-VIDEO products. Other options may be set in the Web GUI. The
AES OUT 2, 3, and 4 connections are reserved for possible future
implementation.
10.
AES In
: These four BNC jacks accept AES3id digital audio pairs at a 48
kHz sample rate. An optional license key must be purchased to enable this
function. Refer to the
System Setup
section in Chapter 4 and to Figure 4-
13 to install software licenses. Channels are selected as AES 1-8.
11.
SFP Module Cages
:
The two SFP cages
are
provided to accept one or
two
optional
SFP modules compatible with SDI coaxial or optical signals.
Single or dual transceiver arrangements are possible. The SFP modules
are hot swappable for convenience. An optional license key must be
purchased to enable each module. A software license must be installed for
an SFP port to function. Refer to the
System Setup
section in Chapter 4
and to Figure 4-13 to install software licenses. The following SFP modules
are offered:
a.
3G/HD/SD-SDI Single Video Receiver with Active Loopback
:
This uses HD-BNC connectors. With the OPT-MPEG option, it carries
MPEG over ASI.
b.
3G/HD/SD-SDI Video SFP with Optical Input
: This uses LC
fiber connectors. It is a Single-Mode Receiver, Medium Haul, Non-
MSA, and no output. It handles video only. With the OPT-MPEG
option, it carries MPEG over ASI.
c.
3G/HD/SD-SDI Dual Receiver
: This uses HD-BNC connectors.
With the OPT-MPEG option, it carries MPEG over ASI.
d.
3G-SDI Transceiver
: This uses HD-BNC connectors. Input and
output are both SDI. SDI Output (video only output at 1080p60) is
from selected source (e.g. MPEG to SDI).
e.
SMTPE 2022-6 Receiver
: This uses Multi-Mode 850 NM, LC fiber
connectors. It allows the iAM-VIDEO to monitor SDI audio
transmitted in real time over Ethernet. You must use the emSET
configuration software to set up this option. It is available from
Wohler Technologies Technical Service.
f.
SMTPE 2110 Receiver
: This uses Multi-Mode 850 NM, LC fiber
connectors. It allows the iAM-VIDEO to monitor SDI audio
transmitted in real time over Ethernet. You must use the emSET
configuration software to set up this option. It is available from
Wohler Technologies Technical Service.
g.
SMTPE 2110 or 2022-6 Receiver
: This uses Multi-Mode 850 NM,
LC fiber connectors. It allows the iAM-VIDEO to monitor SDI audio
transmitted in real time over Ethernet. You must use the emSET
configuration software to set up this option. It is available from
Wohler Technologies Technical Service.