Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 42 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
6. Remove chamotte and clean rear stove wall.
7. Remove lower front panel.
8.
Release screws of front inspection lid and
remove inspection lid. Make sure the sealing
is correctly seated when reassembling.
Mind hot ash and hidden glowing
embers!
9.
Vacuum burner pot. Lift burner pot out and
clean. Clean combustion air holes with a
suitable
implement
(screwdriver)
if
necessary.
10. Vacuum
pot
holder
and
base
plate
thoroughly.
Important notes: When inserting the burner
pot again make sure it rests fully on the pot
holder. Remove any combustion residues on
the pot or pot holder. Check that the burner
pot is firmly seated in the pot holder and
doesn’t side-wobble by more than 1 to 2 mm
– if it does, you will need to replace the
burner pot (wearing part). The “burner nose”
must point forward.
