Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 45 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
6. Release both screws of inspection cover.
7. Remove inspection cover.
8.
Release the four screws of front inspection
lid and remove inspection lid. Make sure the
sealing
is
correctly
seated
when
reassembling.
Mind hot ash and hidden glowing
embers!
9.
Vacuum burner pot. Lift burner pot out and
clean. Clean combustion air holes with a
suitable
implement
(screwdriver)
if
necessary.
10. Vacuum
pot
holder
and
base
plate
thoroughly.
Important notes: When inserting the
burner pot again make sure it rests fully
on
the
pot
holder.
Remove
any
combustion residues on the pot or pot
holder. Check that the burner pot is firmly
seated in the pot holder and doesn’t side-
wobble by more than 1 to 2 mm – if it
does, you will need to replace the burner
pot (wearing part). The “burner nose”
must point forward.
