Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 57 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
12. Vacuum
pot
holder
and
base
plate
thoroughly.
Important notes: When inserting the burner
pot again make sure it rests fully on the pot
holder. Remove any combustion residues on
the pot or pot holder. Check that the burner
pot is firmly seated in the pot holder and
doesn’t side-wobble by more than 1 to 2 mm
– if it does, you will need to replace the
burner pot (wearing part). The “burner nose”
must point forward.
13. Pull base plate out towards you and clean.
14. Vacuum flueways thoroughly.
15. Inspect flue gas fan for soiling.
Only clean the fan if necessary (see
Chapter 9.10).
See Chapter 9.10 for further service
procedure.
