WMS Bluebird Series, Service Manual & User Manual

Page: 40 / 116

2-4
Chapter 2: Installation
November 2007
Change CPU
Shipping Lock(s)
To ensure that the CPU Enclosure Shipping Lock, for the RoHS CPU NXT and the CPU NXT2, does
not open during transport, a Torsion Spring keeps the lock from slipping open,
Figure 2-2 . The
Torsion Spring must be removed when the Shipping Lock is replaced.
Figure 2-2 Shipping Lock on the inside of the CPU Enclosure door.
1 Ensure that the Power Switch is set to Off and the AC Line Cord is not connected to the outlet.
2 Remove CPU Enclosure from the game.
3 Release the Torsion Spring, which is no longer needed to hold the CPU Enclosure Lock in
place,
Figure 2-2 (A).
4 Remove the Shipping Lock, Figure 2-2 (B).
5 When the Shipping Lock is removed, discard the Torsion Spring.
6 Remove the cam for the new lock, Figure 2-2 (C), using a screwdriver to bend the cam until it
breaks off.
7 Install the new lock according to casino protocol. Ensure that the cam removed in the previous
step is installed with the new lock.
Table 2-2 Lock Specifications (metric)
Lock Location
Designed
Length Extended
Length* Cam
Description
Cam Part No.
Rotation to
Lock (viewed
from key end)
Upper (Main)
Door 16 mm 13 mm inside
or outside 38 mm lg. 6 mm
offset 01-001614-04 clockwise
Lower (Belly)
Door 16 mm 6 mm inside,
13 mm outside 38 mm lg. 6 mm
offset 01-001614-04 clockwise
CPU Enclosure 16 mm 13 mm outside Special 01-010849 clockwise
CPU Enclosure
(NJ) 16 mm 13 mm outside 32 mm flat 01-12793-08 clockwise
Bill Acceptor
Cassette Door 16 mm 13 mm outside 22 mm flat 01-12793-10 clockwise
Progressive
Meter
Enclosure 16 mm 13 mm inside 24 mm flat 01-12793-07 clockwise
Secondary
LCD Door (Top
Box) 16 mm 13 mm outside Special 20-9741-G clockwise
*Conditions:
„ Extending the lock inside requires a new cam.
„
Extending the lock outside requires a spacer.
A
B
C