WMS Bluebird Series, Service Manual & User Manual

Page: 54 / 116

3-6
Chapter 3: Maintenance
November 2007
Replacing the
Button Panel
Lenses and Inserts
Replace the lens and button insert by completing the following steps:
1 Replace the saved insert onto the button, Figure 3-7 .
Figure 3-7 Replacing the button insert.
2 Snap the lens back onto the button by using the forefinger pushing straight down at the center,
Figure 3-8 .
Figure 3-8 Snapping the lens into the button.
3 Confirm all four sides of the lens are snapped into the button.
Remove Button
Panel
Use the following instructions to remove the Button Panel:
1 Before beginning this procedure, follow the instructions for disconnecting the game.
WARNING: Disconnect the line cord before servicing to avoid electrical shock.The game must
be powered off before the Button Panels are removed or inserted. Button Panels are not hot-
swappable.
2 Unlock and open the Belly Door.
3 On the interior of the Belly Door, remove the Cable and the Belly Light cable from the Belly
Door cable clamps,
Figure 3-9 .
Figure 3-9 Original Button Panel and cables.
4 Disconnect Button Panel cable branches P1 and P2 from their connectors on the Main Door,
Figure 3-9 .
cable
Belly Glass
light cable
connector
#8 Keps
nuts
#6 hex screws
Belly Glass
Light cable
Belly Light Bracket
P1
P2
Button
Panel cable
connections