W5500S2E-S1 serial to Ethernet module
W5500S2E-S1 user manual
39
UART Setting
Baud Rate: The baud rate option, default: 115200, between 1.2Kps to 1.152Mpbs
#
Data Bit: The data bit option, default: 8, it could set into 7 or 8 bits
#
Parity: The parity bit option, default: 8, it could set into NONE, ODD or EVEN
#
Stop Bit: The stop bit option, default: 1, it could set into 0.5, 1, 1.5 or 2 bits
#
Flow Control: Shows the flow control option, default is NONE, it could set into NONE or
“CTS/RTS mode”
#
#
User configurable
Save Settings
: The button to save all these settings, it shows a prompt window with “Success saved!”
message as Figure 7-5.
Figure 7‑5 Web page prompt - Save Success
Reset
: Reset button, if the user doesn’t need to configure on advanced settings, please press the
OK button for reset the module; after reset, the saved settings will be activated.
Figure 7‑6 Web page prompt - reset
7.3
Advance Settings
Figure 7-7 shows the advance settings page of WIZS2E module.
Figure 7-7 Basic setting page
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
