W5500S2E-S1 serial to Ethernet module
W5500S2E-S1 user manual
Document Revision History
Version
Date
Remarks
V1.0
2016/05/06
Official Release
V1.1
2017/09/15
1.
Specification and text description
2.
The maximum parameters length of AT+PASS and AT+NAME is changed
to 15
3.
Add descriptions of AT+START_MODE and AT+DEBUGMSGEN
command
4.
Replacement some of the figures
5.
Updated the evaluation board information
6.
Unified the naming of WIZS2E ConfigTool (Configuration tool for
Windows® )
V1.2
2018/04/19
1.
2.2 chapters, the SW1 button description; SW3 pin 2 description changed
from GND to VCC, the diagram was also modified
2.
Replace “
/n/r
” by “
\r\n
”
3.
Updated Figure 2-4 Evaluation Board reference design schematic diagram
4.
Updated all web page screen captures
5.
Modified the interpretation of the AT+NETBIOS command
6.
Maximum length of AT+DOMAIN parameter changed to 32
7.
Maximum parameter length of the AT+C1_SER_T is changed to 5; range of
serial frame interval is: 0~60000
8.
Maximum parameter length AT+C1_BIND is changed to 1
9.
Maximum parameter length AT+C1_TCPAT is changed to 3
10.
Modify the description of the AT+NAME command partially
11.
The parameter length AT+MAC is removed
12.
The maximum parameter length of AT+DEFAULT and AT+RESET is
changed to 15
13.
Modify the first 6.4.3.22 section module name
14.
AT+DEBUGMSGEN default parameter is changed to 1
15.
Chapter 2.2 RJ45 is modified from 10P to 8P and the corresponding
description is modified
16.
Add Chapter 5.3 WIZS2E ConfigTool new features introduction
17.
Update all WIZS2E ConfigTool screen captures
Copyright notice
Copyright © WIZnet H.K. Ltd. All rights reserved.
Contact E-mail:
For more information, please visit:
http://www.wiznet.com.hk/
Downloaded from
Downloaded from
