W5500S2E-S1 serial to Ethernet module
W5500S2E-S1 user manual
14
5
WIZS2E ConfigTool
WIZS2E ConfigTool is a
Windows® configuration tool
compatibles to W5500S2E and W7500S2E
series modules. WIZS2E ConfigTool can be used to search, enquiry and configure W5500S2E and
W7500S2E device features and information.
5.1
Collect module’s setting information
Click the toolbar’s
button, WIZS2E ConfigTool will search all WIZS2E module that has
connected in the same network segment (Direct connect or under the same router). The figure 5-1
shows the result as mentioned. The search section shows all the modules in MAC address format as
the parent node for the list of information of WIZS2E module. By pressing the “ ” button, it shows
the detail information about this module. After pressing the MAC address of that specific module,
it will list out all the IP address, serial interface settings and other parameters of this module. This
information presents on the Basic settings and Advance Option tab that were next to the search
section.
Note: Prior configuration, it is recommended that you disable other unrelated network adapters in
your host computer (including virtual network adapters, if you use the wired network adapter
configuration module to turn off the wireless network card) and ensure that all device IP addresses
in the LAN are not conflicting.
Figure 5-1 WIZS2E ConfigTool basic settings interface
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
