70
Account > User name. See Figure 3.6-4.
Figure 3.6-4 User Name
Anonymous login:
Enable
, and input IP. No username or password is required, you can
log in by anonymity (with limited rights). You can click logout to use other users to log in the device.
Add user
It is to add user in group and set the right control of the user.
The highest right user admin can’t be deleted by default.
Step 1
,
Click
and the system will pop out the interface of “Add User”, which is shown in Figure 3.6-5.
Figure 3.6-5 Add User
Step 2
, Enter user name and password, select group and check authority list.
Note
● Once the group is selected, then the user right can only be subset of the group which can’t surpass the
right of the group.
● Users are recommended to make it lower than senior users when defining general users in order to make
user management convenient.
Step 3
, Click
to complete config.
