9
PTZ Function
Description
Preset
Preset Setting
. Input the Preset number, click
to add preset, click
to delete preset, Click
to Call the preset.
Tour
Tour.
Select Tour from the dropdown list and then click "Start" button, you can begin
tour.
Scan
Auto Scan
. Select Scan from the dropdown list, click "Start" button, you can begin scan
operation. Default SN is 1.
Patten
Patten Scan.
You can select Pattern from the dropdown list and then click "Start" button
to begin Patten Scan.
Assistant
PTZ Auxiliary function
. Input the Aux Number, Click
to Enable, Click
to Disable. The Aux Number depends on the PTZ protocol.
Pan
Pan Scan.
Select Pan from the dropdown list and then click “Start” button and it
can realize horizontal rotation of the PTZ.
Go To
Accurate positioning
. Input the Horizontal Angle (0~3600), Vertical Angle (-900~900)
and Zoom(1~128) Value, click
to go to the right position.
Table 2.4-2 PTZ Setting Functions Description
2.4.3 PTZ Menu
The menu interface is shown in Figure 2.4-3; please refer to Table 2.4-3 for more details about parameters.
Figure 2.4-3 PTZ Menu
Parameter
Description
Direction button
Up and down buttons are used to select parameters, left and right buttons
are used to select parameter value.
OK
Click it to confirm.
Open
Open OSD menu.
Close
Click it to close menu.
Table 2.4-3 PTZ Menu Description
