34
Parameter
Description
Authentication
PEAP (protected EAP protocol).
Username
It needs the username to login, which is authenticated by the server.
Password
Please input password here.
Table 3.2-8 802.1x Parameter Description
Step 4
, Click
to complete config.
3.2.2.6 Bonjour
Bonjour, known as zero config networking, can auto discover the PC, device and service on the IP network.
Bonjour uses the IP protocol with industrial standard to allow the device to discover each other automatically
without inputting IP address or configuring DNS server.
After Bonjour function is enabled, the network cameras will be auto detected in the operating system and client
which support Bonjour. When the network camera is auto detected by Bonjour, it will display
the “Server Name”
which is configured by users.
Step 1
,
Select “Setup > Network > Advance > Bonjour”.
The system will display the interface of “Bonjour”, which is shown in Figure 3.2-13:
Figure 3.2-13 Bonjour
Step 2
,
Check “Enable” to set server name.
Step 3
, Click
to make config valid.
In the operating system and client which support Bonjour, it can visit network camera WEN interface via Safari
browser, the steps are as follows:
Step 1
,
Click Safari browser “Display All Bookmarks”.
Step 2
,
Open “Bonjour”, and it can auto detect the network camera which enables Bonjour function in the LAN.
Step 3
, Click it to visit corresponding WEB page.
3.2.3 Platform
3.2.3.1 ONVIF
ONVIF (Open Network Video Interface Forum) describes network video model, port, data type and data switch
modes. ONVIF standard targets to create a network video frame protocol that communicates network video
products from different manufacturers.
Step 1
,
Select “Setup > Network > Platform > ONVIF”.
The system will display the interface of “ONVIF”, which is shown in Figure 3.2-14
