49
3.4.2 Smart Plan
3.4.2.1 Smart Plan
Each preset can set different intelligent function, the corresponding setting can be valid only when it selects exact
intelligent function.
Note
:
It needs to set preset in advance, please refer to “
” for setting method.
Step 1
,
Select “Setup > Event > Smart Plan”. The system will display the interface of “Smart Plan”, which is shown in
Figure 3.4-8
Figure 3.4-8 Smart Plan
Step 2
,
Select preset in the “Add Plan”. The system will display corresponding plan of the preset. Then enable
corresponding intelligent functions according to the requirements. Shown in Figure 3.4-9
Figure 3.4-9 Add Smart Plan.
● Enable IVS, face detection function.
Step 3
,
Click IVS, Face Detection to enable corresponding functions. The selected intelligent function appears to
be bright, you can click it to cancel the function.
Step 4
, Click
to complete config.
3.4.3 IVS
Intelligent Video Surveillance (IVS) needs these basic requirements for scene selection:
●
The total proportion of the target shall not exceed 10% of the image.
