38
Step 2
, Click San No.
Step 3
, Drag Speed bar and set scan speed.
Step 4
, Click
, adjust the camera direction to make it reach proper location.
Step 5
, Click
and
to set the location as the “Left/Right Limit” of the camera.
Step 6
, Click
to start scan.
Step 7
, Click
to stop scan.
3.3.2.4 Pattern
Pattern can continuously record the operations implemented upon the device, such as pan, tilt, zoom, call preset
and etc. You can directly call the pattern after it is saved completely.
Step 1
,
Select “Setup > PTZ Settings > Function > Pattern”.
The system will display the interface of “Pattern”, which is shown in Figure 3.3-5:
Figure 3.3-5 Pattern
Step 2
, Select Pattern No.
Step 3
, Click
and click
, operate the PTZ according to the actual needs.
Step 4
, Click
to complete recording.
Step 5
, Click
to start pattern.
Step 6
, Click
to stop pattern.
3.3.2.5 Pan
Pan means the speed dome rotating continuously 360° horizontally with a certain speed.
