17
which is to adjust the image definition.
Step 1
,
Select “Setup > Camera > Conditions > Defog”. The system displays the interface of “Defog”, which is
shown in Figure 3.1-11:
Figure 3.1-11 Defog
Step 2
, Select the defog mode, OFF, Manual and Auto, it is OFF by default.
When set to Manual, it can also set the defog intensity, Low, Middle and High. It is Middle by default.
Step 3
,
Click
to complete config.
3.1.1.8 Profile Management
It can select three modes of profile management, such as normal, full time and schedule.
● When it selects “Normal”, the video will be monitored according to the normal config of the camera. Show as
figure 3.1-12:
Figure 3.1-12 Profile Management - Normal
● When it selects “Full time”, it can select day or night, which is corresponding to the config file of the camera
conditions for day or night. Show as figure 3.1-13:
Figure 3.1-13 Profile Managements - Full Time
