26
Figure 3.2-2 DDNS Config
Parameter
Description
Server Type
DDNS server Type and IP address:
● CN99 DDNS Server address: members.3322.org
● NO-IP DDNS Server address: dynupdate.no-ip.com
● Dyndns DDNS Server address: members.dyndns.org
Server Address
Domain Name
It is the domain name that the users register on the website of DDNS server
provider.
Username
Input the username and password which are acquired from DDNS server provider.
The users need to register account on the website of DDNS server provider.
(including username and password)
Password
Interval Time
After the designated DDNS is updated and enabled, it will launch the interval of update
requirement regularly, the unit is minute.
Table 3.2-2 DDNS Parameter Description
1. Click “Save” after filling in the interface.
2. Input domain name in the PC browser and press “Enter” button.
It means successful config if it can display the device WEB interface; it means config failure if it
doesn’t display.
3.2.1.3 PPPoE
It can set up network connection via enabling PPPoE (Point-to-Point Protocol over Ethernet) dial mode;
the device will acquire a dynamic IP address of WAN. Please gain the PPPoE username and password
provided by ISP (Internet service provider).
Step 1
,
Select “Setup > Network > General > PPPoE”. The system will display the interface of “PPPoE”, which is
shown in Figure 3.2-3:
Figure 3.2-3 PPPoE Interface
Step 2
,
Check “Enable” and input PPPoE username and password.
Step 3
, Click
to complete PPPoE config.
The system will prompt that it has been successfully saved and real-time display the acquired IP address of WAN,
users can visit the device via the IP address.