2
Safety
10
Translation of the original operation manual
•303_208176_1004_en•ski
➤
If you use thinner in the material hoses (e.g. for the complete cleaning) all connected
material heaters must be turned off.
Complete cleaning may only be done when the unit has cooled.
DANGER OF EXPLOSION!
➤
Smoking, open flames or any other possible ignition sources are not allowed any-
where near the area of operation
Danger caused by not complying the explosion protection
This unit may NOT be used in explosion-proof areas !!
Spraying equipment, which is not explosion-proof protected, is not allowed in places which
are subject of the explosion-proof regimentation.
2.3
Operating staff and personal protective equipment
Authorised Operators
People under the age of 16 should not operate this equipment.
The management in charge of the operation of the machine must make the user’s hand-
book available to the operator and must make sure that he has read and understood it.
Only then may the system be put into operation.
We recommend the manager has this confirmed in writing.
The operator of the machine is obliged to report any changes in the machine which might
affect its safety to the manager, as he must ensure that the machine is functional.
The responsibilities for the different activities on the system must be laid down clearly
and adhered to. No unclear competencies may remain as these could endanger the
safety of the users.
The operator must make sure that only authorised persons work on the machine. He is
responsible to third parties in the working vicinity of the system.
Personal protective equipment
➤
We call to your attention that the valid guidelines and requirements in accordance
with work surroundings (mining, closed areas etc.) must be absolutely adhered to.
➤
Please, wear the prescribed protective clothing at all times, as solvent vapors and
solvent splashes cannot be completely avoided.
➤
The sound pressure level of the equipment is below 85 db(A).
Nevertheless, appropriate noise protection means should be made available to the
operating staff.
➤
Although spraying fog is kept to a minimum when the correct pressure setting and
proper method of operation are observed, the operating painter should wear a protec-
tive breathing mask.
➤
Never use solvent or other materials which present a health hazard for cleaning skin.
Only suitable skin protective, skin cleansing and skin care materials may be used.
