12
WT-1011RC IP65 GSM Remote Controller And Alarm System
WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Example of Returned Message:
#GOT1=00900
To activate output relay 2, you can send a text command via SMS specifying the number
of seconds the output should stay on to the unit. It is possible to set up to maximum of
65,535 seconds.
Text Command:
*RLY2#XXXXX
N stands for output relay number 2
XXXXX stands for 5 digits value: The number of seconds
Example:
To turn on the output relay number 2 for 1 hour, you can send the following text
message to the unit.
*RLY2#03600
Example of Returned Message:
#RELAY2=03600
Note: Sending the following SMS Message to unit will switch off the relay
*RLY2#00000
The unit can generate text alerts to all 8 administrator’s Mobile phone numbers when the
relay has turned on or off. To set the administrator to receive this alert, you would send
the following commands by SMS message to the unit.
Text Command:
*RETR#XXXXXXXX
X stands for position for 1 - 8 administrators with function value: 0 (OFF), 1 – 9
(number of text alerts)
Example:
To program the unit to generate 2 SMS to administrators 1, 2, 3, 4 and 5 only, you
would send the following SMS message to the unit.
5.4.2 Switch On the Output Relay 2 For a Specific Time (By SMS)
5.4.3 Setting the Recipient of Relay Off Alert
