26
WT-1011RC IP65 GSM Remote Controller And Alarm System
WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
To check the signal strength (0-31), you would send the following SMS command to the
unit.
Text Command:
*CSQ?#
To check the serial/IMEI number, you would send the following SMS command to the
unit.
Text Command:
*SERIE?#
This function allows you to receive a list of last 20 events of the Guest users who
operate the output relay 1. When all selected, the system can generate a list with last 20
events to all 8 administrators. To enable the administrator to receive this list, you would
send the following commands by SMS message to the unit.
Text Command:
*FULL#XXXXXXX
X stands for position for 1 - 8 administrators with function value: 0 (OFF), 1 (ON)
Example:
To enable administrators 1, 2 and 3 to receive the list of last 20 events, you would send
the following SMS message to the unit.
*FULL#11100000
Format of Last Contact Call
*LACC=Txxhhmm
T
stands
for
the
type
of
access
where:
‘S’
stands
for
SMS
‘C’
stands
for
CALL
xx
stands
for
the
position
of
the
authorized
user
hh
stands
for
hour
mm
stands
for
minute
5.7.9
Checking Signal Strength
5.7.10 Checking the Serial/IMEI Number of WT-1011RC Device
5.7.11 Setting the Recipient of Last Contact Call
