22
WT-1011RC IP65 GSM Remote Controller And Alarm System
WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
The system has an anti-theft function that can used to detect the person who hijacks the
WT-1011RC device. It allows the owner to identify the hijacker’s SIM Card number by
sending a warning message to the programmed owner’s number when the SIM card has
been switched. To activate and also deactivate this function, you can send the following
SMS command to the unit.
Text Command:
*ANTH#X
X stands for ON (1) or OFF (0) value
When *ANTH#1 is applied, means it will alert the owner by sending a warning message
when the SIM Card has been changed.
When *ANTH#0 (Default) is applied, means this function is turned off.
Alert message received: WARNING! SIM Card Has Been Changed On WT-1011RC
With Anti-Theft function turned on, it can generate text alerts to all 8 of the
administrator’s Mobile phone numbers whenever the SIM card has changed. To set the
administrator to receive this alert, you would send the following commands by SMS
message to the unit.
Text Command:
*REAT#XXXXXXXX
X stands for position for 1 - 8 administrators with function value: 0 (OFF), 1 – 9
(number of text alerts)
Example:
When SIM card has been changed, it will generate 3 SMS to administrators 1, 2, 3 and 1
SMS to the rest, you would send the following SMS message to the unit.
*REAT#33311111
Example of Returned Message:
#REAT=33311111
5.6.5 Anti-Theft Feature
5.6.6 Setting the Recipient of Anti-Theft Alert
