27
WT-1011RC IP65 GSM Remote Controller And Alarm System
WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Example of last 20 events received by SMS:
*LACC=C011102S032012C302050C352315C252359C870015C140056C260615C270815S30
0925S021015C301130C351520C251615S161616C151620C031725C021730C011800C0218
02
Note: The last 20 events report will be sent only when GPRS function is disabled and the output
relay is on normal function (*FTRY#1). Make sure the time clock is programmed otherwise the
time will not shown correctly.
To setup a password for reset command, you can send the following SMS command to
the unit.
Text Command:
*PAWO#XXXXXX
XXXXXX stands for 6 digits password: 123456 (Default)
Example:
To change the password to 654321, you would send the following SMS command to the
unit.
*PAWO#654321
To reset the unit, you can send the following SMS command to the unit.
Text Command:
*REST#XXXXXX
XXXXXX stands for 6 digits password based on *PAWO# (Default: 123456) and it
can be changed anytime.
The WT-1011RC can continuously monitor the system status of its own. When there is
a problem with system operation or the module is not working properly, it will restart
the system automatically to avoid the unit stopped working permanently. If the system
failed to respond within 15 – 30 seconds, it will restart the system.
5.7.12 Setting the Password for Reset Command
5.7.13 Reset the WT-1011RC
5.7.15 Auto Restart System
