Wittenstein cyber motor cyber dynamic 17, Operating Manual

Page: 15 / 30

cyber
®
dynamic line Transport and storage
Revision: 04 5022-D029179 en-13
4.1 Scope of delivery
日本語
español
françai
s
italiano
english
deutsch
4 Transport and storage
4.1 Scope of delivery

Check the completeness of the delivery against the delivery note.

Missing parts or damage must be notified immediately in writing to the carrier, the
insurance company, or
WITTENSTEIN cyber motor GmbH .
4.2 Packaging
The motor is delivered packed in foil and cardboard boxes.

Dispose of the packaging materials at the recycling sites intended for this purpose. Observe
the applicable national regulations concerning disposal.
4.3 Transport
Note the weight of the payload and use an appropriate transport device.
Specifications on the weights, refer to Chapter 3.5 "Weight".
Ambient temperatures between -20 °C and +50 °C are permissible for transport only.
4.4 Storage

Store the motor in a horizontal position at a temperature of 0 °C to + 40 °C in the original
packaging. The ambient conditions must be dry, dust-free, and not subjected to vibrations
(see Chapter 6.1 "Safety information and environmental conditions").

Store the motor for a maximum of 2 years.
For storage logistics, we recommend the "first in - first out" method.
The storage time can exceed the warranty period of the motor.
A warranty extension cannot be granted because if this.
Suspended loads can fall and can cause injuries.

Do not stand under suspended loads.

Secure the motor with suitable fasteners (e.g. belts) before transport.
Hard shocks caused by harsh handling during transportation (e.g.
falling, hard dropping) can damage the motor.

Only use hoisting equipment and lifting accessories with sufficient
capacity.

Never exceed the maximum permissible load for hoisting equipment.

Slowly put down the motor.