Wittenstein Alpha Cyber Simco Drive 2, Operating Manual

Page: 42 / 56

cyber
®
simco
®
drive 2 operating manual
en-40 5022-D057946 Revision: 02
6.6.11 X8: Digital I/O

An external power supply must be connected to supply the digital outputs.

The digital outputs are galvanically isolated from the logic and power of the
drive amplifier.

The digital outputs are short-circuit proof.
Figure Pin
no. Signal Function Input / output
1 VCC24 Digital output
supply Input
2 GND Ground
reference
3 DIN1 Digital input 1 Input
4 DIN2 Digital input 2 Input
5 DIN3 Digital input 3 Input
6 DIN4 Digital input 4 Input
7 DOUT1 Digital output 1 Output
8 DOUT2 Digital output 2 Output
Plug type on drive amplifier: Dinkle 0225-3708L 8-pin
Connection Feature Unit Minimum
value Nominal
value Maximum
value
DINx Input voltage V DC 20 24 28
Input current mA DC 3 4 5
Input resistance kOhm 5.6
Sample time msec 1
GND Ground reference
DOUTx Output voltage V DC 18 24 26
Output current mA DC 40
Output resistance kOhm 1 1.5 2
Refresh rate Hz 1
VCC24 Voltage V DC 20 24 28
Current mA DC 80
GND