English - 43
●
USING
THE
DE
VICE
AS
AN
iSCSI
ST
OR
A
GE
6.
After the target has been connected,
Windows will detect its presence and
treat it as if a new HDD has been added
which needs to be initialized and
formatted before you can use it. Right
click My computer > Manage to open
the Computer Management window
then go to Disk Management and a
window should pop up automatically
asking whether you want to initialize
the newly found HDD.
Click [OK] button then format this
drive as normally you would then
adding a new HDD.
7.
When you initialize the connected
iSCSI storage, if the connected iSCSI
target volume is larger than 20TB, you
must select the GPT(GUID Partition
Table) partition style.
USING AN iSCSI STORAGE ON LINUX
To use an iSCSI Storage on Linux, you must install the Open-iSCSI Initiator on your Linux system.
For more information and download location of Open-iSCSI,
please visit: http://www.open-iscsi.org.
•
After installing Open-iSCSI, restart the open-iscsi service.
# /etc/init.d/open-iscsi restart
•
Discover the iSCSI targets on a specific host, for example, 192.168.168.100 with default port 3260.
# iscsiadm–m discovery –t sendtargets–p 192.168.168.100:3260
