English - 35
●
REMO
TE
M
ANA
GER
UTILIT
Y
NETWORK SETTINGS
You can set the network information of the device.
1.
Select the device that you want to configure the
network information on the STORAGE LIST
2.
Click the [Network Settings] button.
3.
Change the network information of the device
following the network environment.
–
You can select either automatic or manual mode.
–
Change the IP Address, Subnet, Gateway, Default
Gateway.
4.
Input the password of the device.
5.
Click the [OK] button.
J
`
When you configure the IP address, you must configure as the unique IP address different from the IP addresses of
other devices located in the network.
`
If you select the Manual mode in <Mode>, you must configure all of the IP Address, the Subnet, and the Gateway.
`
User cannot change the settings of Default Gateway if the network bonding is set.
