12_
installation
installation
Please take note of the followings before using this product.
•
Do not use the product outdoor.
•
Do not spill water or liquid in the connection part of the product.
•
Do not impose the system to excessive shock or force.
•
Do not pull out the power plug forcefully.
•
Do not disassemble the product on your own.
•
Do not exceed the rated input/output range.
•
Use a certified power cord only.
•
For the product with an input ground, use a grounded power plug.
•
Mount at least 1 internal HDD in the NVR to connect, and then connect this product.
•
It is recommended to install a rack to ensure stable operation. At this time, the rack must be installed on the
shelf or be fixed with a rack mounting kit.
INSTALLING HDD
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product
damage.
Please consult your provider for further information on HDD installation since improper installation or
settings may damage the product.
`
Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
J
`
Cautions for data loss (HDD care)
Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when
operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user’s carelessness or miss use.
`
Cases might cause damage to HDD or recorded data
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
If exposed to shock when disassembling or installing, data stored in the hard disk may be
damaged.
A sudden power failure or turning off the product while in HDD operation may damage the
hard disk drive.
HDD or files stored inside may be damaged if the main body is moved or impacted during the
HDD operation.
