installation
14_
installation
o
x
J
`
The HDDs to be installed should be the same model and capacity.
`
When you insert a hot-swap drive bay, push the end of the drive handle.
Turn on The SySTem
1.
Connect the power cable of the device to the wall outlet.
2.
Connect the network cable to the Network Port 1 on the rear panel of the device and the network
port of the gigabit switch.
3.
Press the power switch on the front panel for at least 2 seconds.
4.
If the device is turned on, it activates a beeping sound and the system booting will be started.
Power switch
