setup screen
38_
setup screen
Network disconnection
When the network is physically disconnected, it is considered as an event to be saved.
1.
From the Setup menu, select the <
Event ( )
> tab.
2.
Click <
Network disconnection
>.
3.
Set whether or not to <
Enable
>.
4.
Configure the event motion schedule and event motion
conditions.
`
For more information about <
Event activation time
> and <
Event
action settings
>, refer to “
Alarm input
”. (page 37)
5.
When done, click [
Apply
].
CONFIGURE ANALYSIS SETTINGS
Motion detection
You can configure settings to generate an event signal when a motion is detected.
1.
From the Setup menu, select the <
Analytics ( )
> tab.
2.
Click <
Motion detection
>.
3.
Select the channel to set.
4.
Set whether or not to <
Enable Motion detection
>.
5.
Set an <
Include area
> and <
Exclude area
>.
You can set up to 4 areas.
6.
Configure settings for each item.
•
Sensitivity : Sets the sensitivity of motion detection for each
area. Decrease the sensitivity in an environment where the
background and the object are clearly distinguished, and
increase the sensitivity in a dark environment where the
background and the object cannot be clearly distinguished.
7.
Select whether or not to use the handover.
When a motion is detected in the set detection area, a specific camera moves to a specific PTZ preset
position.
`
You can specify cameras by detection area.
8.
Configure the event motion schedule and event motion conditions.
`
For more information about <
Event activation time
> and <
Event action settings
>, refer to “
Alarm input
”. (page 37)
9.
When done, click [
Apply
].
J
`
Use continuous recording rather than motion detection event recording in areas where motion detection is frequent.
`
Since the log is recorded once every 5 minutes, the buffered motion detection log data may be damaged when the power is
turned off.
`
Detected size of an object may have difference with the actual size according to its shape.
`
In the following cases, motion detection performance may be impaired or a malfunction may occur.
-
The object color or brightness is similar to the background.
-
Small activities around the border area of the camera’s field of view.
-
Multiple movements continue occurring at random due to a scene change, rapid lighting changes or other reasons.
-
A fixed object continues moving in the same position.
-
Motions of less position changing such as approaching to the camera or fading away from the camera.
-
Moving object approaches to the camera too close
-
An object hides other objects behind.
-
Too fast object (for a proper detection, one object should be found overlapping between contiguous frames).
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
-
In severe snow, rain, wind or in dawn / dusk.
