network connection and setup
20_
network connection and setup
CONNECTING TO THE ENCODER FROM A SHARED LOCAL PC
1.
Run device manager.
It will scan for connected encoders and display them as a list.
2.
Double-click an encoder to access.
The Internet browser starts and connects to the encoder.
M
`
Access to the encoder can also be gained by typing the encoder’s IP address in the address bar of the Internet browser.
CONNECTING TO THE ENCODER FROM A REMOTE PC VIA THE
INTERNET
Since using the Device manager on a remote computer that is not in the Broadband Router’s network cluster is
not allowed, users can access encoders within a Broadband Router’s network by using the encoder’s DDNS URL.
1.
Before you can access an encoder in the Broadband Router network, you should have set the port range
forward for the Broadband Router.
2.
From the remote PC, launch the Internet browser and type the DDNS URL address of the encoder, or the
IP address of the Broadband Router in the address bar.
ex) http://ddns.hanwha-security.com/ID
M
`
For registering the DDNS settings, refer to “
Registering with DDNS
”. (page 31)
