•
VoiceAlert
2
User Manual
Required VA
2
Configurations
(Refer to TABLE 1)
:
Set codes 01-05:
Store recipient telephone numbers
Set code 11:
To turn on automatic voice call playback, number of times to redial if no answer and, number of
time to ring before hanging up the call.
Set code 24:
If you have set all five, voice call numbers and require VA
2
to call all five numbers then set
code 24 as 00000.
If you only require recipient 1 to receive voice call notification then set code 24 as 07777. For each additional
recipient you wish to be notified via voice call, change the 7 to a 0.
Hardware Set Up:
Locate the telephone connection cable supplied in the VA
2
kit.
Connect one end to the VA
2
’s
LINE
jack as above.
Connect the other end of the cable to the incoming Telkom
LINE
jack.
If required, connect telephone handset to VA
2
’s PHONE jack. This will allow you to still make use of the
landline for normal telephone use.
Dialling Procedure:
When armed zone triggers, VA
2
will dial recipient number 1, followed by recipients 2,
then recipient 3 and so on up to recipient 5 until a recipient answers the call.
If, for example, recipient 1 answers the call the recorded voice message for the triggered zone will
automatically play back over the telephone’s headset.
Recipient 1 can then perform specific tasks by entering commands via the telephone’s keypad as follows:
•
Enter valid four-digit password (
xxxx
) to let VA
2
know that you have listened to the message and
would like to turn on on-site monitoring for listening in to the site (turn on ‘listen in’ feature).
•
Enter
11
to listen to the recorded voice message again.
•
Enter
00
to turn of on site monitoring (turn off ‘listen in’).
•
Enter
33
to end the alarm notification, to stop VA
2
’ from calling the other telephone recipient
numbers, and to disarm VA
2
.
•
Enter
44
to end the alarm notification, to stop VA
2
’ from calling the other telephone recipient
numbers, but do not disarm VA
2
.
Voice Call Notification via GSM Dialler….
Voice call notification makes use of existing landline and or connected GSM dialler (sold separately) to relay
zone trigger events as specific voice messages (Contact your WirelessAlert Agent for further information on
GSM Dialler).
Copyright InFocus Trading 111 cc, 2009
46
