•
VoiceAlert
2
User Manual
Code 24 – Set Zone Voice Message Playback Over Recipient
Telephone and or Voice Message Playback Over Built-in
Speaker
Prerequisite for basic VA
2
operation:
Yes.
Reason for Configuration:
Playback of zone voice messages either via recipient telephone and or via
VA
2
’s built-in speaker.
Background info:
Configuration code 24 is used to set which of the five stored telephone numbers (address
codes 01 – 05) should receive voice call alarm notification or not. For playback of stored zone voice
messages via voice call, one or more recipient telephone numbers must first be stored for codes 01- 05
(Please refer to configuration code 01-05).
Each of the five recipient telephone numbers 01-05 can be set for playback of voice messages using a five-
digit key stored under configuration code [24]. The default setting is for all recipients to receive specific
stored voice message when a zone is triggered (i.e.
Key = 00000
for recipients 01 - 05).
Important:
If it is preferred that specific stored zone messages rather be played back ‘on the spot’, over the
built-in speaker, then change the digit in the key for recipient 01 to a 7 (i.e.
Key=70000
). Voice messages will
then play back over VA
2
’ built-in speaker and not be delivered via telephone voice call for that specific
recipient.
Further examples
- If you have stored five numbers but you decide that you only want recipient number 02
to receive a voice call messages when zone is triggered, then you would set code 24 as follows:
[24] 70777
.
If you want all five numbers to receive voice call then set code 24 as
[24] 00000
. If you want numbers 1 and
four to be called then set code 24 as
[24] 07707
.
Hint:
If you want voice messages to playback over the built-in speaker first and then for VA
2
to deliver the
voice message to your phone then store your telephone number as recipient 02 and set the code [24] key to
70777.
Function Options:
1. Set recipients for receive voice call message when zone triggered.
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
24
•
Press
OK
•
Enter
70777
•
Press
OK
•
LCD will Display as above [24] with desired key (e.g. 70777)
•
Press
Return
to exit
Related configuration codes
(You may need to set the following related configurations):
•
01 – 05
•
29
Code 25
– Set Zone Door Phone Feature (Detailed in Advanced Manual only)
Copyright InFocus Trading 111 cc, 2009
30
