•
VoiceAlert
2
User Manual
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
39
•
Press
OK
•
Enter
00
•
Press
OK
•
LCD will Display as above [39] 00
•
Press
Return
to exit
Related configuration codes
(You may need to set the following related configurations):
•
None
Code 40 – Recording Voice Message Segments
Prerequisite for basic VA
2
operation:
YES.
Reason for Configuration:
Voice Recording Segments need to be recorded so they can be played back in
response to specific zone activations. The individual zone voice segments should be recorded such that they
clearly describe the layout of the property or premises under monitoring. This will ensure rapid and effective
intruder detection and notification (e.g. “Intruder in the Driveway!, Intruder in the Driveway!, Intruder in the
Driveway!”).
Background info:
The VA
2
voice recording memory chip has space for 12 voice messages, stored as
segments of 7.5 seconds each (one fore each of the 12 zones). The segment for wired zones 1 – 4 are
coded as 00 – 03. The segments for wireless zones 1 – 8 are coded as 04 – 11.
Function Options:
1. Set VA
2
for recording voice message segments. Recording starts at segment (00) and ends at
segment (11).
Note –
When recording message segments the VA
2
will automatically roll over to the
next recording segment key when previous segment has finished recording.
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
40
•
Press
OK
•
Enter
00
•
Press
OK
•
Speak clearly into the microphone with your mouth about 5 –10 cm away from the microphone
pinhole. Do not touch the VA
2
unit during recording as this will result in feedback and distortion on the
microphone (resulting in poor message sound quality).
•
Press
OK
•
The recorded voice message will be played back.
•
Also note that segment key rolls over for recording next voice message
Copyright InFocus Trading 111 cc, 2009
34
