•
VoiceAlert
2
User Manual
Reason for Configuration:
Each wired zone must be allocated one or more recorded voice message
segment to be played back in response to zone trigger. If not allocated, then when VA
2
places calls to
recipient telephone numbers, voice message segments will not be played back.
Background info:
Use address codes 30 to allocate wired zones to specific recorded voice message
segments.
Note:
Recorded voice messages are stored as segments of 7.5 seconds each (
see Configuration Code
40
). The Code key for voice message segments starts at 00 for segment 1, and progresses through to key
11 for segment 12. More than one recorded segment can be allocated to a single zone if required.
Function Options:
1. Allocate wired zones (1-4) to voice messages segments.
Procedure
(e.g. To allocate one wired zone per message segment, starting at segment 1, enter zone
number and then enter a * to progress to next voice segment…. ending at voice segment 03)
:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
30
•
Press
OK
•
Enter 1*2*3*4
•
Press
OK
•
LCD will Display as above [30] 1*2*3*4
•
Press
Return
to exit
Related configuration codes
(You may need to set the following related configurations):
•
16
•
24
Code 31 – Reset VA
2
to Factory Default
Prerequisite for basic VA
2
operation:
NO.
Reason for Configuration:
In the event you wish to set all configuration codes back to default settings.
Note -
Resetting VA
2
will not delete coded remotes and wireless sensors. If you wish to delete all coded
wireless remote and sensors then please refer to Configuration Codes 50 and 51.
Background info:
Use Code 31 with caution as you will lose all configuration data when reset is performed
(therefore requires the use of password).
Function Options:
1. Reset to factory defaults (requires use of password).
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
31
•
Press
OK
•
Enter
1234
Copyright InFocus Trading 111 cc, 2009
32
