•
VoiceAlert
2
User Manual
•
The recorded voice message will be played back.
•
Press
Return
to exit
Hint:
If you are not happy with one of the recordings (may be distorted or too soft), or if you want to change a
message, then you can do this quickly by using the specific key segment for that message (no need to re-
record all messages). For example, if you wish to adjust or change message for recorded segment 4, then
proceed as below:
•
Press
Return
•
Press
PRG
•
Enter
40
•
Press
OK
•
Enter
03
(this is the key code for segment 4)
•
Press
OK
•
Record New Message
•
Press
OK
•
Press Return
Related configuration codes
(You may need to set the following related configurations):
•
29
•
42
•
51
Code 42 – Listen to All Recorded Message Segments
Prerequisite for basic VA
2
operation:
NO.
Reason for Configuration:
This function provides a quick method for listening to all the recorded voice
segments. Messages are played back over the built-in speaker.
Background info:
This is useful it allows you to check the quality of all the recorded voice segment and
decide if any need to be improved for recording quality or message content. If you have forgotten exactly
which segment a specific voice message was recorded into but you have a general idea, then Code 42
allows you to listen to all messages and determine the location (key number) of the message (important to
know this when adding zones to message and when coding wireless sensors onto VA
2
).
Function Options:
1. For retrieving and listening to all recorded voice segments.
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
42
•
Press
OK
•
Enter
00
•
Press
OK
Copyright InFocus Trading 111 cc, 2009
36
