•
VoiceAlert
2
User Manual
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
81
•
Press
OK
•
LCD will Display as above [91] 061450 (i.e. VA
2
was disarmed on 6
th
of current month at 11:50)
•
Press
Return
to exit
Related configuration codes
(You may need to set the following related configurations):
•
19-22
•
70-79
•
80-87
Operating Options
Please watch the online VA2 tutorial video at the following link for VA2 quick start instructions:
http://www.youtube.com/playlist?list=PL2DC117CCE6023D78
Or follow these steps....
Wireless Zone Message Playback Over Built-in Speaker….
Set code 01-05:
Set voice call notification recipient telephone numbers using code 01-05
Recommended setting – Must set a number for at least the first recipient Code 01 in order for basic operation
of VA
2
.
Set code 10:
Turn on VA
2
for receiving RF signals from remotes and wireless sensors.
Recommended setting – 23
Set code 11:
Turn on automatic playback of zone voice message when user answers telephone call. Also
set number of times to redial if user not answer, and number of ring times before hang-up call.
Recommended setting – 0001
Set code 15:
The list of zones for which alarming must take place if zone is triggered (i.e. zones that will be
active when VA
2
is armed.
Recommended setting – 123456789101112
Set code 16:
Set the zone numbers for which siren must sound when zone triggered.
Recommended setting – If you want voice message only then don’t set any zones….. Set code value as #
and press OK to remove all zones for siren.
Set code 24:
Use this code to configure for Voice Message playback over built-in speaker as apposed to
over telephone voice call.
Recommended setting – 77777 (to turn of voice call notification for all of five recipient telephone numbers
and rather have voice messages play over the built-in speaker).
Set code 40:
Record voice message.
Recommended setting – Recommended to record messages for all zones.
Set code 50:
Code remotes onto VA
2
.
Recommended setting – Code at least one remote for remote arming disarming of VA
2
.
Set code 51:
Code wireless sensor onto wireless zones.
Recommended setting – Code wireless sensors onto wireless zones as required according to the layout of
the property under monitoring.
The procedure for coding sensors onto VA
2
is detailed under code 51 in the configuration section. You can
also watch the tutorial at the following link:
http://www.youtube.com/playlist?list=PL2DC117CCE6023D78
Copyright InFocus Trading 111 cc, 2009
44
