25
SHoRTCUT FUNCTIoN SeTUP
When wakening, “
WAKeN
” is showed on LCD.
NoTe: Remotely stun code should be edited in the programming software.14digits are
the maximum.
ATTeNTIoN: When remotely kill or remotely stun is wakened, transceiver returns to
normal operation.
Channels scan skip
under Channel mode, after pressing
key
display on LCD and then press
key to set
the current channel as channel scan skip. Repeat the above operations to cancel channel scan skip.
'
1.
SKIP
' display on LCD means that current channel will not be scanned;
No displaying '
2.
SKIP
' means that current channel will be scanned.
Frequency/channels scan
under standby mode, pressing
/
key and hold on to begin frequency scan or channel scan
frequency scan
1.
Under VFO mode, frequency scan is available. This function is used for monitoring signal of various
communication frequency points by transceiver . Press
[PTT]
/
key to exit.
Channel Scan
2.
under channel mode, this function is used for monitoring signal of various channels in this mode.
Press
[PTT]
/
key to exit.
