20
SHoRTCUT FUNCTIoN SeTUP
Turn channel switch or press
3.
key/
key,to choose the offset frequency channel NO.you want ;
Press
4.
[PTT]
key and then press
key until transceiver voice beeping of "Du",namely,the offset
frequency channel mode is being
"
+
"icon display on LCD :namely transmiting frequency is higher than receiving
"
-
"icon display on LCD :namely transmiting frequency is lower than receiving
Squelch levels setup
The function is for seting the receiving radio signal.When signal reach certain value you could hear the sender calling ,if not the
radio will keep silence .
In standby state,press
1.
key ,
display on LCD and then press
key ,"
SQL
" display on LCD.;
Turn band switch or press
2.
key/
key to choose the squelch levels you want ;
"00"-"09" 10 levels of squelch in total to choose ,"00" as min setup value (Normally open ).
Press
3.
[PTT]
key /
key to exit.
High and low power setup
After pressing
key ,the LCD display
and then press
key to choose High/low power.
"
L
"icon display on LCD :namely transmiting frequency is LOW
"
H
"icon display on LCD :namely transmiting frequency is high
