30
FUNCTIoN MeNU SeTUP
"+"icon display on LCD :
namely transmiting frequency is higher than receiving.When
reverse frequency is opened,the receiving frequency is higher than transmiting .
"-"icon display on LCD :
namely transmiting frequency is lower than receiving.When reverse
frequency is opened,the receiving frequency is lower than transmiting .
Nothing show :
the Offset frequency direction is closed .
press
5.
key to return to upward menu. Press
[PTT]
or
key to confirm and exit.
Frequency Step size setup
Under frequency mode (VFO), only Stepping function is available, while frequency input and frequency scan are both restricted
by stepping.
After pressing
1.
key , the top left corner of LCD displays
and then press
key to enter into function menu.
Turn band switch or press
2.
/
key to choose No.6 function item. It shows “
STeP
” on LCD;
Press
3.
key to enter into function menu setup,the setup value display on LCD;
Turn band switch Press
4.
/
key to choose the desired Frequency Step size ;
This produc thas 5k,6.25k,10k,12.5k,25k five different setup size frequency to choose from.
press
5.
key to return to upward menu. Press
[PTT]
or
key to confirm and exit.
Frequency reverse
Whencurrent channel open the frequency reversion function. Now the transmitting frequency and receiving frequency are
interchanged, namely, receiving frequency switches to transmitting frequency while transmitting frequency switches to receiving
