14
BASIC oPeRATIoNS
Squelch off /Momentary Squelch off
While side key
[PF1]
is setup for Squelch Off Momentary / Squelch Off function.You can monitor the weaker signal that is hard
to hear by pressing this key.
Squelch Off Momentary: Pressing and holding [
1.
PF1]
key, squelch circuit is not mute, release this key to make squelch circuit
turn to mute.
Squelch Off: Press
2.
[PF1]
key once, squelch circuit is not mute, but you can hear the back-ground noise. Press the key again
to make squelch circuit turn to mute.
Receiving
You can hear the transmission party's calling when the channel you are operation is called and the LCD light turn green.
icon and signal strength display on LCD ,you could hear the transmitting calling.
NoTe: When your transceiver is setup of higher squelch level, you may not receive this calling. If current
channel is programming of decode signaling, only the same signaling call can be heard but not other calls.
(Please refer to the signaling relations)
Transmitting
Before transmitting, it is recommended to monitor the channel you are using to ensure it is not busy by pressing and holding
[PF1]
side key.And then keep press PTT button and start talking at about 2 inches from the speaker hole.Speak in normal tone
to get the best acoustic fidelity.
NoTe: Press PTT,it is transmitting when LeD light is on,Release PTT to receive signal.
