23
SHoRTCUT FUNCTIoN SeTUP
In standby state,press
1.
key ,
display on LCD and then press
key the VOX function to be on/off;
"
2.
VoX
" display on LCD.Namely ,the VOX function is on;
"
3.
VoX
" disappear on LCD.Namely ,the VOX function is off .
Frequency reverse
When the frequency reversion function.The transmitting frequency and receiving frequency are interchanged, namely, receiving
frequency switches to transmitting frequency while transmitting frequency switches to receiving frequency. If CTCSS / DCS
signaling is set, it will also interchange.
In standby state,press
1.
key ,
display on LCD and then press
key to turn on/off frequency reversion
function.;
When it display“
2.
ReV
” icon on screen, it means that current channel start frequency reversion function;
When “
3.
ReV
” icon disappear on screen, it means that current channel close frequency reversion function.
DTMF Code Selective
This function only choose to prestore and send the DTMF code
In standby state,press
1.
key ,
display on LCD and then press
key the the desired
group and DTMF data on LCD.If don't edit DTMF data
，
only display current group number;
Press
2.
key or
key to choose the desired group and DTMF data. If this group don't edit
DTMF data, it will display current group number
、
NEW and “__”.
When current group display “__”,omes into DTMF edit state.Now you can enter the DTMF editing
3.
data you need by keypad.
Press key
4.
[PTT]
to send and save the selectived DTMF signal.
